Drill Press

Grizzly G7945 5 Speed Bench-Top Radial Drill Press Review


Are you planning to purchase a drill press but you are not sure about the specific kind that can give you top-notch drilling outcomes? If so, this review will give you reasons why the Grizzly G7945 5 Speed Bench-Top Radial drill press is the best option you should use for your drilling task. The Grizzly G7945 5 Speed Bench-Top Radial drill press is a kind of drill press that features vacillating swing up to 34 inches as well as pivoting heads which ensure the user can likely drill at any angle he or she desires.

This type of drill press can help you be able to work with less effort and more efficiently when using it, and hence it is considered to be an incredible all-around power tool. As a result of this drill press having a variable oscillate of up to 34’’, it means you can be able to drill a hole precisely in the center of a 34-inch workpiece. The Grizzly G7945 5 Speed Bench-Top Radial drill press also has a tilting headstock that can enable you to perform appropriately angled hole cutting. Its tilting headstock also makes this powerful tool to have the potential of carrying out horizontal drilling in any form of an angle.

Grizzly Industrial G7945-34' Benchtop Radial...
16 Reviews
Grizzly Industrial G7945-34" Benchtop Radial...
  • Motor: 1/2 HP, single-phase, 120V, 5A
  • Footprint: 13-1/2" x 8-1/2"
  • Overall height: 31-1/2"
  • Spindle travel: 3-1/4"
  • Spindle taper: JT-33

Features of the Grizzly G7945 5 Speed Bench-Top Radial drill press

This tool has a table which inclines at a 90-degree angle both right and left and hence is suitable for a wide range of varying angled drilling applications. Here are the other top-notch features that this drill press has:

1. Providing Safety and Security to the User

This drill press is a kind of tool that provides safety and security which comes from the ability of this tool to take charge of control of the drill bit. By this tool having control over its drill belt, it ensures that the component cannot in any way break when being utilized.

When using the press drill, it is appropriate you either use a vice or clamp in order to keep in place the workpiece to your drill press table. This is vital since it prevents the falling out or slipping of the stock as the tool runs and thereby protecting you against an accident.

2. The drill press is Equipped with a Powerful Motor

This kind of drill press has a powerful motor that is strong enough to run it without utilizing much effort. The drill is capable of offering power via leverage which makes the tool easier to be used by the user without utilizing too much effort.

This radial drill press’s rack and pinion lever can be used for lowering the spindle and chuck of the tool towards the workpiece, therefore, helping the user to cut holes effortlessly.

3. Equipped with a Shaft Serving as the Prime Drilling Assembly Axis

The shaft of this radial drill press can be hauled ahead to a maximum distance of 17 inches and this means you can drill a hole as deep as 34 inches in the middle of the stock. The shaft makes it possible also to drill into the extremity of a lengthy stock like a bedpost or a table leg.

4. It Provides Radial Action

The drill press provides radial action which makes it possible to make angled holes without tilting the drill press. This radial drill press bit can enter the stock properly at any angle yet ensuring the workpiece is remaining in a horizontal inclination. This is a helpful feature if you are making holes in a lengthy board which does not make it possible to slope the workpiece in order to attain the angle you desire.

Pros of this Radial drill press

*Equipped with a Shaft

As a result of its radial configuration, this kind of drill is equipped with a shaft that works as the tool assembly axis.

*Provides Safety

The radial drill press provides security and safety to a person who is working with his or her stock.

*Requires Less Energy to Use it

The 0.5 horsepower 110-volt motor of this drill ensures a person utilizes less energy when drilling holes.


This kind of drill, when compared with a usual benchtop model, will require you to have more space for accommodating the lengthy axis shaft.

Bottom Line 

It is worth buying the Grizzly G7945 5 Speed Bench-Top Radial drill press since it will not only make you attain great outcomes when using it to make holes but will help you work with little energy and more efficiently. Consider using this kind of drill when the need arises so that you can reap from what it offers.

How Do Organic Aromas Diffusers Work?

Next article

You may also like


Comments are closed.

More in Drill Press