Drill Press

Reasons Every Woodworker Needs a Drill Press

0

In deed this is an important tool to have for modern homes and shops similar. There are a number of ways you can use it and a number of things you can do with it to suit your preferences. From wood crafting to metal drilling, a drill press does it all. Although there are different types of best tools for each job. The main ones include: bench tops, table tops and magnetic ones.

This is versatile and accurate one and it’s a tool every woodworking workshop should have. You can only enjoy woodworking with a quality drill press. And for your craft to be appealing then it means one should be ready to invest on it. A professional woodworker wouldn’t have a hard time doing so, since the interest is there in the first place, and therefore, motivation and drive are obviously inherent as well and thus quality work achievement. Before purchasing a press drill to use for any of your projects there are factors that you need to consider first. After testing a couple of models I’ll argue that choosing a quality tool for your workshop is based on the following factors:

Technical specifications

Technical aspects of any drill are rated based on motor power, drill speed, quill travel (drilling depth) and the swing (working column height). Working with a compact drilling machine with a 8 inch swing, five speeds, a spindle travel of 2 inches, 1/3 horsepower 6 1/2 workable, 45 degrees tilting power can be great but there is something more than that which you might need for a professional workshop. I personally prefer working with a drilling machine that has a 13 to 15 inches swing, a table size of 13x 10 inches, a 3/4 horsepower, 16 speeds and a range (preferably 200 to 3600 rpm) because it allows one to get the precise selection needed when handling different wood materials and drill bit sizes. Also working on a such high technical ability machine delivers an impressive work in the workshop hence more ideal for professional work.

Build quality

When you discover your machine is vibrating too much when you working with it, then it is likely to create a lot of inaccuracies in the workshop. The device could also be dangerous as well. Right from its top to the bottom, the build up quality should be proper for use in the workshop. Based on experience, i would recommend a brand with a cast iron base, table and even drill heads. A 150 pounds drill with extreme rigidity, plenty of power, little run-out of the chuck (with the help of high quality ball bearings on the spindle) can be great for any hobby wood worker to a professional workshop wood worker.

Features

Right from the precision laser slighting to the depth gauges, there are many features that differentiate a top drill machines from also-rans. An ideal drilling device should have a fairly standard angle gauge, micro-adjustable and independent depth stop and depth scale, twin laser system for more accuracy and a self-tensioning system for delivery of more power.

Price

With great difference in the technical specification and build up quality, the price of the different prices might vary largely. If you are planning to buy a versatile high quality that will deliver an impressive work, you should go for highly priced drilling tool. Top performing are rigid, more durable and have greater capacities. Take for example, you go to your nearest tool store to get a power tool. Now there is a variety of manufacturers and of course, prices differ too. Like in any product, the more expensive, then the better the quality. Better quality tools in wood working have better design features and parts, as well as a high tolerance in manufacturing and they also perform better.

Chuck quality

Chuck quality might vary from one machine to another but it is something that matters big time. Find a chuck that can operate smoothly over its (whole) range of adjustment. Also, getting some additional information on run out -in the spindle & chuck assembly-can help you know how much a bit wobbles as it turns. The less the run out, the better.
As a woodwork professional, you must get the best tools you can afford. But that also depends on the projects that you plan on handling. Before dropping by your nearest hardware store to get your tools, consider on what exactly you will be making and what quality you want to achieve and client needs.

Type of drilling devices

1. Top bench Drills are those which require a table beneath the actual drill machines. The table is bigger than the normal ones (possibly square in size). People require these drill machine to work on wood and other metals to craft important things in workshops.

If you need any delicate drilling done or if you are looking to carve wood for furniture recommended. They have a locking mechanism which keeps the material in place while you actually drill. Also, these allow you to perform repeated drilling’s.

A) Benched Top Drill machine DP-1512B 110V 15″ Benched Top Drill Device, 12 Spindle Speeds
B) drill press model DP-15VSF 110/220V Single Phase (Pre-wired 110) 15″Chuck
C) Floor Drilling machine model -2012F-HD 110V 20″ 3 Spindle Taper

2. Table Top Drilling machine. Table top Drill machines are basically smaller than bench top drill machines. The latter is exclusively used in home projects and in occasional drilling. As the machine boasts of the same mechanism, the motor of the machine is less powerful. The chuck size is smaller as well But you will still be able to mount small things for drilling. Also, these machines and the tables are transportable. These things are particularly good for woodworking and furniture crafting.

A) Rockwell RK7032 Drilling machine, is the first in our list of top 5 Table Top Drilling tool. It has a tilting table (0 to 45 degrees) which tilts from left to right and vice-versa. Rockwell RK7032 has 5 speed settings and a gear box too. The motor is very powerful (3.6 amps) which allows you to drill with speed and drill hard metals easily. The speed is 600 to 2500 RPM which works great for home workshop. The throat depth is 5 inches. So, it travels deep. Spindle length is a little over 2 inches. So, larger pieces will fit in this drilling tool perfectly.

B) This is a magnetic drilling tool which can serve as a Table Top just as easily. With a 2/5 horsepower motor, the drilling equipment is able to produce 5 different speeds. So, you can be careful and speedy when needed with the top speed being 3100 RPM. The speed control feature allows you to work on delicate projects and carvings. The drilling equipment also has a “Safety Power Lock Switch” as well Turning it on makes sure you don’t face any accidents.

C) Factory-Reconditioned Skil 3320-01-RT 3.2 Amp 10-Inch drill press. There is a X2 laser system with two laser beams. It works areat when you have to drill holes in a precise location. Drilling is often about digging holes through different metals. This machine makes the task easy with 5 speed settings. Along with speeds, you can adjust how deep drilling to be done as well. The machine tilts (from 0 to 45 degrees) to ensure precise drilling.

Conclusion

When selecting the best brand of drill press in the market, find one with superb performance or functionality, one with the best value of money and drilling equipment that has outstanding features as well as technical specifications. You can compare the available brands on-line or locally to find out the ones performance greatly and going at reasonably lower prices.

Reasons you Need to Know About Drill Press and Hand Drill

Previous article

Basic Information About the Drill Press

Next article

You may also like

Comments

Leave a reply

More in Drill Press